Sagem Cell Phone MW 302X User Guide

251053234.qxd 19/04/01 14:11 Page 1  
MW 302X  
MW 304X  
 
1
IN A FEW WORDS ...  
Lock and unlock the keyboard  
from the standby screen  
Switch on  
Press then OK.  
*
Press  
.
Redial last number  
Call  
Press  
twice.  
Dial the number then press  
.
Make a call from a number stored  
in the directory  
Answer  
By name: enter the first letter of the name,  
Press  
.
press  
, scroll down the list to find your  
to call.  
correspondent, then press  
Hang up  
By location in the directory: enter the location  
Press  
.
number then press to call.  
*
Switch off  
Press  
(long press).  
Hands-free  
To communicate, press  
.
Briefly, the functions  
 
2
MENUS  
Enter using  
Validate using OK  
or  
Quit or return to the previous  
menu using C  
Navigate using  
and  
Services  
Directory  
Games  
Accessories  
Text messages  
Security  
Call services  
Ringing and beeps  
Controls  
Briefly, the menus  
 
3
You have just bought a mobile phone and we  
congratulate you on your choice.  
GLOSSARY  
Outgoing call A call made from your phone.  
Your phone will allow you to use different international  
networks depending on the roaming agreements  
between the operators.  
Incoming call A call received by your phone.  
SIM card  
The card containing your subscription  
and access rights to services. The  
detachable part is the “micro-SIM”.  
We would like to remind you that this phone is  
approved to European standards.  
PIN  
The personal code linked to your SIM  
card.  
To get the most out of using your phone, we  
recommend that you read this manual carefully and  
keep it handy for future reference if needed.  
PIN2  
The second personal code linked to  
your SIM card to access certain  
functions (*).  
WARNING  
Phone code  
The phone code is a secret code  
intended to protect the phone in case  
of theft.  
According to the configuration of the networks and  
associated subscriptions, certain functions may not be  
available (indicated by *).  
Compatibility of  
your SIM card  
IMEI  
SMS  
The identification number of your  
phone.  
If an incompatible SIM card is  
inserted, a message will be  
displayed when switching on your  
phone. For further information,  
contact your Operator.  
Short Message Service: for sending  
and receiving short text messages.  
Your phone is  
compatible with SIM  
3V cards only.  
Service  
provider or  
Operator  
Company which manages the network  
subscription.  
The SAGEM logo and trademark are the property of SAGEM SA.  
AT is a registered trademark of Hayes Microcomputer products Inc.  
Hayes is a registered trademark of Hayes Microcomputer Products Inc.  
T9™ Text Input is a registered trademark of ©Tegic Communications Inc.  
T9 is licensed under one or more of the following U.S. Patents: 5,818,437,  
5,953,541, 5,187,480, 5,945,928, 6,011,554 and additional patents are  
pending worldwide.  
 
4
1. Presentation of the phone ..................................... 6  
1.1 Exchanging the coloured front panel................... 9  
6. How to use the text mailbox and the Easy  
Message T9™ function........................................ 24  
6.1 Receiving a short message .............................. 24  
6.2 Editing a message using Easy Message T9™ .. 25  
6.3 Edited messages .............................................. 27  
2. Getting started..................................................... 10  
2.1 Information on the SIM card.............................. 10  
2.2 Installing the SIM card and the battery .............. 11  
2.3 Charging the battery ......................................... 12  
2.4 Switching on/switching off, starting up .............. 13  
2.5 Menu access .................................................... 14  
2.6 Deleting characters ........................................... 14  
7. How to use the call related features .................... 28  
7.1 Forwarding calls ............................................... 28  
7.2 Viewing the list of the last numbers used.......... 29  
7.3 Monitoring the duration and cost of calls ........... 30  
7.4 Displaying the numbers .................................... 30  
7.5 Authorising double call ...................................... 31  
7.6 Configuring automatic redial ............................. 31  
7.7 Voice mail number ............................................ 31  
7.8 Local information distribution ............................ 31  
7.9 Replacing the international prefix ...................... 31  
7.10 Placing calls on hold........................................ 32  
7.11 Multi-conferencing (*) ...................................... 32  
3. Initial communication - Hands-free mode ............ 15  
3.1 Making a call ..................................................... 15  
3.2 Receiving a call ................................................ 16  
3.3 Volume control .................................................. 16  
3.4 Hands-free mode .............................................. 16  
3.5 Ending a call ..................................................... 16  
4. Menu list .............................................................. 17  
8. How to adjust the ringing tones  
5. How to use the directory ...................................... 20  
5.1 Directory display ............................................... 20  
5.2 Storing a number .............................................. 20  
5.3 Deleting a number ............................................ 21  
5.4 Call groups ....................................................... 21  
5.5 Sorting .............................................................. 23  
5.6 Sending a short message to a stored number .. 23  
5.7 Directory space memory ................................... 23  
5.8 Displaying personal numbers ........................... 23  
5.9 Making a call to a stored number ...................... 23  
and the vibrator ................................................... 34  
8.1 Selecting the volume and the type  
of ringing tone ................................................... 34  
8.2 Call groups ....................................................... 35  
8.3 Personalising the ringing tone ........................... 35  
8.4 Setting the vibrator ............................................ 35  
8.5 Selecting silent mode ........................................ 35  
8.6 Setting the beeps .............................................. 35  
8.7 Deleting DTMF tones ........................................ 36  
Contents  
 
5
9. How to adjust and customize your phone............ 37  
9.1 Customizing your phone ................................... 37  
9.2 Selecting the display language ......................... 39  
9.3 Select the type of response .............................. 39  
9.4 Selecting the network ....................................... 39  
9.5 Setting the time and date .................................. 40  
9.6 Controlling screen contrast ............................... 40  
9.7 Converting currencies ....................................... 41  
15.Upkeep ................................................................ 52  
16.Recommendations .............................................. 53  
Answers to your questions ........................................ 56  
10.How to use the security features  
of your phone ....................................................... 42  
10.1 Locking the keyboard...................................... 42  
10.2 Changing the PIN number ............................... 42  
10.3 Changing the PIN2 number (*) ........................ 43  
10.4 Changing the phone code ............................... 43  
10.5 Changing the operator password (*) ................ 44  
10.6 Limiting incoming calls (*) ................................ 44  
10.7 Limiting outgoing calls (*) ................................ 44  
10.8 Setting up the pre-set directory (*) ................... 45  
10.9 Charge checking (*) ........................................ 45  
11. Other functions .................................................... 46  
11.1 Calculator ........................................................ 46  
11.2 Setting the alarm ............................................. 46  
11.3 Setting the timer .............................................. 47  
11.4 Configure your phone with a car kit ................. 47  
11.5 Data parameters ............................................. 47  
12. WAP Function ..................................................... 48  
13.Games ................................................................. 50  
14.Available accessories .......................................... 51  
Download from Www.Somanuals.com. All Manuals Search AndCDoownntleoandt.s  
6
Antenna  
Indicator light  
Ear phone/speaker  
High definition graphics screen  
Programmable key 2  
(depending on model)  
Programmable key 1  
Correction  
@
Mobile Internet access key  
Operate/Call  
Activation of hands-free  
Stop/End call  
Validate  
Scrolling arrow  
Scrolling arrow  
Microphone  
WARNING!  
Battery charging and accessories socket  
During a call, mind you do not obstruct the  
microphone with your hand.  
1. PresentaDtioownnlooadf ftrhomeWpwhwo.Snoemanuals.com. All Manuals Search And Download.  
7
Function keys  
Alphanumeric keyboard  
Made up of 12 keys: 0 to 9, and #.  
*
Stop – Reject a call – Hang up  
To obtain a number or letter, hold down the  
relevant key until the desired number or  
letter appears.  
Go – Call a number – Receive a call –  
Hands-free mode  
Letters with accents are obtained by a long  
press on after entering the letter with no  
*
C
Short press: Return to the previous  
menu – Delete a character  
Long press: Exit menu mode –  
Complete deletion of the entry  
accent.  
Punctuation marks and special symbols are  
obtained by a long press on the # key.  
OK Validate  
Key 1  
- Programmable keys for direct access  
to the functions that you have  
selected (depending on model)  
A long press on key 1 allows you to access  
the voicemail service (depending on model).  
-
Volume control during conversation  
key: lower, key: louder)  
(
-
Contextual action  
@
Mobile Internet access key  
and  
Entry and scrolling through  
the menus.  
Download from Www.Somanuals.com. All Manua1ls.SPearrecsh eAnndtaDtoiwonnloaodf. the phone  
8
Text messages present  
Voice messages present  
Display  
The high definition graphics screen enables  
you to read messages easily. Various icons  
inform you about the status of functions.  
The three keys located under the screen are  
allocated to actions described at the bottom  
of the screen just above the key, each time it  
is necessary.  
Battery charge indicator  
(black if charged, clear if  
discharged)  
Received signal strength  
indicator (maximum  
strength: 5 bars) ; the R  
letter indicates if the  
network found does not  
correspond to the  
For example:  
Validate Pressing  
validates the current  
function.  
subscription  
If flashes, the phone is  
searching for a network  
Hands-free loudspeaker  
Call in progress  
Permanent call forwarding  
Silent mode  
1. PresentaDtioownnlooadf ftrhomeWpwhwo.Snoemanuals.com. All Manuals Search And Download.  
9
Release the front panel by moving the retention lugs  
() if necessary and pushing them with a pen for  
example.  
1.1 Exchanging the coloured front  
panel  
Switch off the phone.  
Remove the rear cover and the battery  
(see on page 11).  
Hold the phone with the front panel facing  
downward, and with the antenna pressed  
against you.  
Free the front panel by moving the  
retention lugs ().  
Install the keyboard in the new front panel.  
Position the phone and the new front panel as  
shown.  
Replace the battery and the cover.  
Download from Www.Somanuals.com. All Manua1ls.SPearrecsh eAnndtaDtoiwonnloaodf. the phone  
10  
2.1 Information on the SIM card  
To use your phone, you have a  
small card called a SIM card. In  
addition to all of the information  
SIM card  
necessary for the network, this card This card must be  
handled and stored  
with care in order to  
contains other information that you  
can modify:  
avoid excessive  
stresses or  
scratches that would  
damage it. If your  
SIM card is lost,  
contact your  
Operator or Service  
Provider  
immediately.  
secret codes (PIN and PIN2 -  
Personal Identification Number)  
directory  
mini-messages  
2. Getting started  
functioning of specific services.  
Note: Do not leave  
you SIM card within  
the reach of small  
children.  
2. Getting started  
 
11  
PIN code  
2.2 Installing the SIM card  
and the battery  
This is the personal code for your SIM card.  
You may be asked to enter this code when  
the instruction: Pin number ? appears after  
you switch on your phone.  
Switch off your phone and  
disconnect the charger.  
Enter the code of between 4 and 8 digits  
given to you by your operator. These digits  
will not be displayed on the screen for  
security reasons.  
The SIM card is inserted beneath  
the phone’s battery.  
Turn your phone over and  
remove the rear cover. Press on  
top and make it slide.  
Press # or OK or  
to validate.  
PIN2 code (*)  
Slide the card along the base  
beneath the retaining plate, with  
the gold coloured sections facing  
towards the phone and the cut-  
off corner lined up to match the  
drawing on the phone.  
If one was given to you by your Operator, a  
second PIN code provides secure access to  
certain functions.  
Warning  
If the wrong PIN code is entered three times in a row, the card will  
be locked. To unlock your card:  
- enter **05*  
Place the battery by first inserting  
the upper section into the  
opening.  
- enter the PUK code (Personal Unlocking Key) provided by your  
Network Operator and validate,  
- enter your PIN code and validate,  
- enter your PIN code again and validate.  
After 5 or 10 times (depending on SIM card type), the SIM card will  
be permanently locked. Contact your Operator or your Service  
Provider to obtain a new card.  
Replace the cover sliding it until  
it locks.  
The same procedure (entering 052) applies when the PIN-2 code is  
blocked (PUK 2 code).  
Download from Www.Somanuals.com. All Manuals Searc2h.AGndeDtotiwnngloasd.tarted  
12  
WARNING  
2.3 Charging the battery  
Your phone is powered by a rechargeable  
battery. A new battery must be charged for at  
least 4 hours before it is used for the first  
time. It will reach its nominal capacity after  
several usage cycles.  
There is a risk of explosion if the battery is  
incorrectly replaced or disposed of in fire.  
Do not short-circuit.  
When your battery has run down, the phone  
displays it and cuts out.  
The battery does not contain any  
components that can be changed by you.  
To recharge your battery:  
Do not attempt to open the battery case.  
Connect the charger to a wall outlet.  
Only use the correct chargers and  
batteries as shown in the manufacturer’s  
catalogue.  
Connect the end of the charging cable to  
the bottom of your phone.  
Spent batteries must be collected at the  
appropriate sites.  
You are advised to remove the battery if  
you intend to leave your telephone unused  
for a long period.  
The phone will start charging. The battery  
charging indicator indicates the charge.  
Charging stops by itself.  
Unplug the cable.  
It is possible that during charging, the battery  
may heat up slightly; this is normal.  
2. Getting started  
 
13  
Network  
indicator  
2.4 Switching on/switching off,  
starting up  
Searching for a network  
The phone then searches for a  
network on which it can  
communicate:  
The indicator of the  
level of network  
signal received  
To switch on your phone:  
Control of the PIN  
code  
If it finds one, the name of the  
network appears on the screen,  
and the indicator light flashes  
green.  
enables you to  
Press  
to switch on your  
visualise the quality  
of reception. If it  
shows less than  
three bars, look for  
better reception to  
make your call in  
good conditions.  
If your phone  
displays SIM absent,  
phone.  
If access to the SIM card is  
protected by a secret code, the  
phone will ask you to enter your  
PIN code.  
press  
(long  
You are ready to make or receive a  
call.  
press) to switch off  
your phone and  
check that your SIM  
card is correctly  
positioned.  
If the R letter and a network  
name are displayed, calls can be  
Enter the code of between 4 and  
8 digits given to you when you  
were given your SIM card. These  
made and the indicator light flashes green.  
If the R letter is displayed without any  
network name, only emergency services  
will be accessible (police, ambulance, fire  
brigade).  
digits will not be displayed on the screen  
for security reasons.  
Press # or OK or  
to validate.  
If the flashes, the phone will keep  
searching. No network is available.  
Download from Www.Somanuals.com. All Manuals Searc2h.AGndeDtotiwnngloasd.tarted  
14  
Switching off  
2.6 Deleting characters  
You can cancel an entry error:  
Hold down the  
key until the end  
Press quickly on C to delete the last  
character.  
message is displayed.  
Release the key. The phone switches off.  
If you press this key longer, you will delete  
the previous word.  
2.5 Menu access  
The menu functions permit you to verify or  
modify the various functions of your phone to  
adapt it to your needs.  
Press the scrolling arrows  
to access the menus.  
or  
Direct access to  
menus  
Scroll through the menus using  
the scrolling arrows then press  
OK to access the selected menu.  
To directly access a  
menu, press  
then enter the  
number of the  
selected menu.  
Each time you want to validate an  
action, press OK.  
To abandon an action, press C.  
To exit the menu mode, press and hold C.  
2. Getting started  
 
15  
International call  
3.1 Making a call  
Press 0 (long press)  
to display + then dial  
the country code  
without waiting for a  
tone, then the  
The network is displayed.  
Dial the number, including the  
area code if necessary, by  
pressing keys on the  
number you require.  
alphanumeric keypad.  
Press  
.
During the call, flashes on the screen,  
and tones may signal the establishment of  
a connection.  
3. Initial communication  
Hands-free mode  
When the person you have called  
answers, speak.  
Emergency  
services  
Depending on the operator, you can contact the  
emergency services with or without a SIM card or  
when the keyboard is locked. It is sufficient to be in a  
zone served by a network. To call the international  
emergency service, dial 112 then press  
.
Other emergency service numbers may exist,  
depending on the country.  
3. Initial communication  
 
16  
The “Hands-free”  
mode enables you to  
follow a  
conversation with  
several people and  
be free to move, for  
example, to take  
notes during your  
conversation.  
3.2 Receiving a call  
3.4 Hands-free mode  
When you receive a call:  
During a call, you can transfer from  
handset mode to hands-free mode  
simply by pressing one key and the  
reverse.  
Press  
then speak.  
The caller’s number is displayed when it is  
presented to the network.  
Press  
.
All incoming and outgoing call numbers  
are registered in the list of the last calls.  
The screen displays for handset mode  
and  
for « hands-free » mode.  
3.3 Volume control  
Increase or decrease the volume during a  
conversation by pressing the or  
keys.  
!
Before putting the phone to your ear, check the volume  
control settings as well as the selected listening method, especially  
if using integrated hands free mode, which could cause ear damage  
if used incorrectly.  
3.5Ending a call  
Press  
.
The end of call message appears on the  
screen.  
3. Initial communication  
 
17  
You have the option of personalising the presentation  
of the menus, and so of limiting access to certain  
functions (See chapter How to adjust and customize  
your phone).  
The following list presents the expert level (limiting  
itself to the 3rd sub-menu).  
Services  
Access to specific services offered by the operator  
Directory  
Directory menu  
Sort by location  
Create record  
Call groups  
20  
4. Menu list  
Available memory  
Personal numbers  
Quit  
According to the model of your phone, to the  
configuration of the networks and associated  
subscriptions, certain functions may not be available  
(indicated by *).  
Scroll through the names entered 23  
See record  
Modify  
Call  
Delete  
Send message  
Quit  
Download from Www.Somanuals.com. All Manuals Search And4D.owMnelonadu.s  
18  
Double call  
31  
Text messages  
Activation  
De-activation  
Status  
Access to the text mailbox  
24  
28  
Call services  
Call forwarding  
All voice calls  
Automatic redial  
Voice mail number  
Local information (*)  
Replace “+” prefix (*)  
31  
31  
31  
31  
All conditional fwd  
Cancel voice forwards  
Forward if busy  
Forward if no answer  
Forward if unavailable  
Data forwarding  
Faxes forwarding  
View last numbers  
Options  
Ringing and beeps  
Volume and choice of music  
Call groups  
Personalised ringing tone  
Create a tune  
Vibrate  
34  
35  
35  
29  
30  
35  
Vibrate and ring  
Vibrate then ring  
Inactive vibrate  
Only vibrate  
Call  
Duration and cost of calls (*)  
Counters  
Delete durations  
Costs (*)  
Silent mode  
Beeps  
Keypad beeps  
Network beep  
Low battery beep  
Tones  
35  
35  
Delete costs (*)  
Display of duration  
Display numbers  
Anonymous mode  
Your number  
30  
36  
Callers’ number  
4.DMowennloaudsfrom Www.Somanuals.com. All Manuals Search And Download.  
19  
Operator password (*)  
Limit incoming calls (*)  
Incoming voice calls  
Incoming data calls  
Incoming fax calls  
All incoming calls  
Limit outgoing calls (*)  
Outgoing voice calls  
Outgoing data calls  
Outgoing fax calls  
All outgoing calls  
Pre-set directory (*)  
Costs (*)  
44  
44  
Controls  
Customization  
Menus type  
37  
Energy saving  
Screen Saver (*)  
Greeting message (*)  
Prog. Key (*)  
44  
Select language  
Automatic response  
Auto. answer  
39  
39  
Any key  
45  
45  
Network selection  
Networks available  
Preferred networks  
Setting time/date  
Display contrast  
Currency converter  
Rapid exchange  
Exchange rate  
39  
Settings  
Limitation  
40  
40  
41  
Accessories  
Calculator  
Alarm  
Timer  
Car kit (*)  
Data parameters  
46  
46  
47  
47  
47  
Currencies  
Security  
Keyboard locking  
PIN number  
Modify  
42  
42  
Games  
Control PIN  
PIN2 number (*)  
Phone code  
Modify  
43  
43  
Control phone code  
Download from Www.Somanuals.com. All Manuals Search And4D.owMnelonadu.s  
20  
5.1 Directory display  
The number of  
telephone numbers  
stored in the SIM  
card directory varies  
depending on the  
capacity of the card.  
Your Operator or  
your Service  
Provider can provide  
you with this  
information.  
You can store the telephone  
numbers that you call regularly:  
in the SIM card,  
in the phone itself.  
Different icons will inform you of the  
directory location where the number  
is stored when you search for it:  
SIM card directory  
Your phone’s directory  
SIM card pre-set directory  
5. How to use the directory  
5.2 Storing a number  
It is advisable to  
store numbers in  
their international  
format (+, country  
code, and number).  
You can verify the  
contents of a record  
and modify it by  
selecting the  
In the Directory menu, select  
Create record. Validate by  
pressing OK.  
Enter the name (the number of  
accepted characters depends on  
the SIM card used). Validate.  
required name.  
Enter the number including the  
area code, if necessary (up to 20  
characters). Validate.  
5. Directory  
 
21  
You can enter spaces in the number  
(displayed as commas “,”) by  
Creating a group  
When sorting by  
location, pressing on  
the key launches  
By default, groups have already been  
created in the phone.  
pressing (long press) on or #. The  
*
*
figures entered after a space are  
a search for the first  
available location;  
pressing on #  
returns to the start  
of the list.  
processed in a DTMF sequence  
(usable after a number).  
In order to look up their characteristics,  
display a list of the groups - Directory/  
Directory menu/Call groups menu.  
If necessary, select the call group  
to which you want to assign this  
number.  
Using the scrolling arrows, choose a group  
and press OK. You are then able to look up  
or alter its characteristics or to erase the  
group.  
Depending on the available space, you can  
select the storage location of the number  
entered: SIM card or phone itself.  
To create a new group:  
Go into Directory/Directory menu/Call  
groups.  
5.3Deleting a number  
To delete the contents of a directory location,  
select the name using the scrolling arrows.  
Validate by pressing OK. Select Delete, then  
validate.  
Choose Create group.  
Enter a name and validate.  
Choose an icon using the scrolling arrows  
and validate.  
5.4 Call groups  
Choose a ring tone, then choose a  
vibrator mode, and validate.  
You are also able to classify contacts  
recorded in the directory into Call Groups.  
The selection of a call group is made when  
entering a number into the directory, or when  
modifying a number you have already saved.  
To each of these groups you attribute certain  
characteristics (icon, ringing tone, vibrator,  
etc.).  
5. Directory  
 
22  
Activate the Call Groups function  
Looking up a group  
Select the group to be looked up and  
press OK.  
If you want the characteristics of the  
groups to apply to each call:  
If call groups are not  
enabled, you cannot  
attach  
correspondents to  
groups.  
Choose See group. The screen presents  
the name, the icon, and the choice of  
vibrator mode of the group.  
Go into Directory/Directory  
menu/Call groups.  
Choose Activate groups.  
If there are contacts attached to this  
Tick the box and validate.  
group, the  
key can be used to view the  
list of these.  
Note: the calls received from contacts who  
do not belong to a Call group use the  
parameters provided in the Ringing and  
beeps menu.  
Modifying a group  
Select the group to be modified, and press  
OK.  
Available memory  
Choose Modify.  
To ascertain the number of groups which can  
still be created:  
Carry out the wanted modifications.  
Validate by OK.  
Go into Directory/Directory menu/Call  
groups.  
Deleting a group  
Select the group to be deleted, and press  
OK.  
Choose Available memory.  
The first number shows the number of  
groups which can still be created, and the  
second shows the maximum number of  
groups.  
Choose Delete.  
Confirm by OK.  
5. Directory  
 
23  
5.5 Sorting  
5.9 Making a call with a stored  
number  
The directory menu enables you to sort the  
stored numbers by name or location; for the  
latter, the free locations are indicated in the  
list.  
Here are all the ways you can call a  
correspondent, whose number you have  
saved in the directory, from the standby  
screen:  
5.6 Sending a short message to a  
stored number  
Select the recipient scrolling using the  
scrolling arrows and validate using OK.  
Select Send message and validate using  
OK.  
Compose your text message.  
Press OK. Select Send and validate using  
OK. The recipient number is displayed.  
1) Enter the first letter(s) of your  
correspondent’s name, as you saved it  
into the directory, and then press  
.
The directory list is displayed, with the first  
name that corresponds with the letter you  
entered at the top. If your correspondent  
is not at the top, use the scrolling arrows  
to select the name.  
Send your message using  
key.  
Press on  
to make the call.  
2) Enter the number under which you have  
saved your correspondent’s details, and  
5.7 Directory space memory  
In the Directory menu, select Available  
memory. Validate using OK.  
The screen will display the amount of  
available space on the SIM card and on  
the phone itself.  
then press on (rapid dial).  
*
3) Enter the number under which you have  
saved your correspondent’s details, and  
then press on #. Your correspondent’s  
number is displayed, at which point you  
can modify or add to the number.  
5.8 Displaying personal numbers  
Using the Personal numbers menu, you  
can create records for your own numbers  
in order to be able to consult them.  
Press on  
to make the call.  
5. Directory  
 
24  
6.1 Receiving a short message  
When you receive a short  
Access to this  
message, an icon flashes on your  
phone screen, a tone is emitted  
and the indicator light flashes red.  
service depends on  
the network. For  
more information,  
consult your  
Operator or your  
Service Provider.  
Your phone indicates:  
the location of the message in the  
phone or in the SIM card,  
the date and time that the message was  
received by the network,  
6. How to use the text  
mailbox and the Easy  
Message T9™ function  
the number of the person sending the  
message.  
By pressing on (Options), various options  
are offered for a received message,  
depending on whether it has been read or  
not.  
To read a message received, select it and  
press OK. Read the message by pressing  
to scroll the text.  
6. TeDxotwmnloaaidlbfroomxWww.Somanuals.com. All Manuals Search And Download.  
25  
If the word proposed corresponds to the  
one you are looking for, press 0 to validate  
it, create a space and go on to the next  
word.  
6.2 Editing a message using  
Easy Message T9™  
T9™ mode is  
The Easy Message T9™ function  
helps you to easily enter short  
messages.  
activated as soon as  
you create or modify  
a message.  
It is possible that there are  
As you go along,  
depending on the  
keys pressed, the  
software looks in a  
dictionary for the  
corresponding words  
that are most  
several words in the dictionary  
that contain the same sequence  
of keys pressed. If the word that  
appears is not the one you want,  
press @ to scroll through the  
words present in the dictionary,  
corresponding to this sequence of  
Select the Text messages/Write  
new... menu and press OK.  
Selecting the editing language  
Language  
Validate T9 by pressing the  
key. Select using the scrolling  
arrows, the language required  
and validate by pressing OK.  
frequently used.  
By default, the  
language used is  
that which is  
keys. When you find the word you want,  
press 0 to validate, type a space and go  
on to the next word.  
activated on the  
phone’s menu  
display (or English if  
a language not  
supported by Easy  
Message T9™ is  
selected in the  
menu).  
Using T9 mode  
Press the key corresponding to  
the letter required, compose the  
word by continuing to press the  
keys corresponding to the  
different letters, without worrying  
about the display, until the whole  
If the word that you want does not appear  
in the dictionary, several additional modes  
allow you to vary the nature of the words  
entered.  
word is entered: it will appear in negative,  
white on black.  
Download from Www.Somanuals.com. All Manuals Search6A.ndTDeoxwtnmloaadi.lbox  
26  
Additional entry modes  
Words in capital letters  
The key  
selects one mode or another.  
You can also choose to type a whole word  
in capital letters by pressing twice on the  
The 123 mode (numeric) inserts numbers.  
key before entering the word. It is  
possible to return to lower case mode by  
*
The Insert symbol mode displays a list of  
symbols and the figures from 1 to 0 that  
correspond to them.  
pressing once on the key.  
*
Punctuation marks  
To enter a symbol, simply type the number  
that appears above the character required,  
for example: 6 for ?. The symbol is  
inserted into the text and you return  
automatically to Easy Message T9™  
mode. Several lists are accessible using  
the scrolling arrows.  
Punctuation marks are obtained by using  
either the 1 key (except in numeric mode),  
or using the Insert symbols mode (quick  
access using # key).  
Accented characters  
Accented characters are automatically  
generated in the word in Easy Message  
T9™ mode. In ABC mode, you need to  
wait for the accented character to be  
displayed whilst holding down the  
corresponding key.  
The ABC (multi-press) mode enters words  
that do not exist in the dictionary or in  
another language. To obtain a letter, hold  
down the corresponding key. The letters  
and numbers scroll. Release the key when  
the required letter appears.  
Capital letters  
You can type capital letters, by pressing  
the key before entering the relevant  
*
character. The following characters will  
automatically return to lowercase.  
6. TeDxotwmnloaaidlbfroomxWww.Somanuals.com. All Manuals Search And Download.  
27  
After validating text, you can choose  
one of the following options:  
The number of  
messages stored in  
the SIM card  
changes depending  
on the SIM card  
capacity; contact  
your Operator or  
your Service  
Send your message  
Store your message  
De-activate Zoom  
Cancel.  
Provider. for further  
information.  
6.3 Edited messages  
Pressing the key (Options), different  
options are available for an edited message:  
-
-
-
-
-
-
-
read it  
send it  
delete it  
modify it  
view the memory occupation level  
delete them all  
select a send option (acknowledgement,  
reply given, period of validity, message  
format)  
-
enter the message centre number.  
Download from Www.Somanuals.com. All Manuals Search6A.ndTDeoxwtnmloaadi.lbox  
28  
Look out for  
7.1 Forwarding calls  
Forwarding voice calls  
incompatibilities; for  
more information,  
consult your  
Depending on your subscription, this  
service allows you to transfer  
incoming calls to another number or  
a mailbox.  
Operator or your  
Service Provider.  
Scroll through the menu to activate the  
type of forwarding that you require:  
•Forward all voice calls: all incoming  
calls are forwarded to a number you  
define  
•Forward all conditional calls  
•Forward calls when your line is busy  
•Forward calls when there is no answer  
on your extension after a period that  
you can define by answering the  
questions on the menu  
7. How to use the call  
related features  
•Forward calls when your phone is  
unavailable, outside of network  
coverage or switched off.  
Enter the number to which you want to  
forward your calls. If necessary, include  
the area code you would use if you were  
calling the number from your phone.  
7. Call related features  
 
29  
Validate by pressing  
The forwarding  
number to the  
messaging centre  
depends on the  
subscription type.  
7.2 Viewing the list of the last  
numbers used  
A message on the screen  
confirms that forwarding has been  
activated.  
You can consult the list of the last  
numbers used (outgoing and  
incoming if available).  
Several options are  
available for this  
You can also cancel all types of  
forwarding.  
Warning  
number: store it in  
your directory, send  
it a short message,  
delete it. You can  
Cancellations of  
forwarding can  
cause particular  
reactions in certain  
networks.  
To redial a number:  
You can view the status of a type  
of call forwarding in order to verify  
whether it is active or not. This  
function is also useful for  
Select from the list using the  
scrolling arrows. Make the call by also delete the  
whole list of  
pressing on  
Shortcut: from the standby  
screen, press on  
.
numbers.  
controlling the number to which your calls  
are forwarded. The information supplied is  
provided by the network in real time.  
.
Forwarding data or faxes  
For services specific  
Depending on your subscription,  
this service permits you to transfer  
data or faxes that are addressed to  
you to another number.  
to a network, such  
as mailboxes, short  
dialling is only valid  
when covered by the  
particular network.  
You may possibly  
prefer an  
international number.  
This memory is  
linked to the phone  
and not to the SIM  
card.  
You can activate the data or faxes  
forwarding service, to enter the  
required number, cancel it and view  
the status of the service.  
7. Call related features  
 
30  
7.3 Monitoring the duration and  
cost of calls (*)  
7.4 Displaying the numbers  
This menu permits you to see the status of the  
display numbers function for:  
•your identity (phone number)  
On the Counters menu you can  
view the duration of the last call  
and all calls made since the last  
deletion.  
This data is purely  
indicative and does  
not represent proof.  
The metering criteria  
for the network can  
be appreciably  
•the identity of the person calling you.  
Anonymous mode  
The Delete durations menu  
enables you to delete the  
If you tick the anonymous box, your number is  
not displayed to the person you are calling.  
different (indivisible  
minutes, etc.).  
duration of the last call and reset  
to zero the total calls counter.  
Your number  
On the Costs (*) menu you can view the  
cost of the last call and all calls made  
since the last deletion.  
•On outgoing calls you can check that your  
phone number is displayed on the phone of  
the person you are calling (CLIR).  
The Delete costs (*) menu enables you to  
clear the cost of the last call and to reset  
the call counter after entering your PIN2  
code.  
•On incoming calls, you can check that the  
telephone number of a phone to which you  
are transferring calls will appear on the phone  
of a person calling you (COLR).  
The Display of duration menu enables  
you to select the duration display during a  
call.  
Callers Number  
•On outgoing calls, you can see the phone  
number to which your call is being transferred  
(COLP) if the person you are calling has  
authorised his or her identity to be displayed  
by deactivating the COLR option.  
7. Call related features  
 
31  
•On incoming calls, when it is activated,  
this function displays on your phone the  
phone number of the person calling  
(CLIP). This function is only possible if the  
caller has authorised his identity to be  
displayed by deactivating his CLIR option.  
Warning  
7.7 Voice mail number  
For network specific  
services, such as  
message centre,  
speed dialling is  
valid only if the area  
you are calling from  
is covered by the  
network. In certain  
cases, it is better to  
use an international  
phone number.  
To program a special permanent call  
number, type in this number and  
validate.This number is used when  
calling the voice mail centre with the  
programmable keys.  
7.5 Authorising double call  
7.8 Local information  
distribution  
Call waiting  
(Service depending on the operator)  
During a call, a special tone can  
inform you that another caller is  
trying to reach you. The caller’s  
number - and name, if stored - is  
displayed on the screen.  
You can activate,  
deactivate and view  
the status of the call  
waiting service in  
order to check  
This memory is  
This menu allows you to activate  
and select reception of information  
distributed by the network. (Contact  
your operator for further details).  
linked to the phone  
and not to the SIM  
card.  
whether it is active  
or not.  
During a call, when pressing the @  
key, the key changes function  
and gives access to different possibilities of  
actions with this call.  
7.9 Replacing the international  
prefix  
(Depending on model)  
7.6 Configuring automatic redial  
In the event that a call is not possible with  
the “+” prefix, you have the option of  
choosing a replacement prefix with no need  
to change the number(s) already recorded  
with the prefix + in the directory.  
You can activate automatic redial either by  
default or on demand.  
7. Call related features  
 
32  
7.10 Placing calls on hold  
Standard commands  
(Service depending on the operator)  
Sequences of standard keys also permit access  
to services such as call notification, call holding,  
multi-conferencing, and open up additional  
possibilities:  
During a call, you can put the  
current call on hold by pressing Ok.  
Warning  
During a call, when pressing the @  
key, the key changes function and  
enables you to access different  
options for the call.  
In this case,  
0
Reject a call holding or waiting (or  
multi-conference calls).  
pressing  
all calls.  
ends  
7.11 Multi-conferencing (*)  
1
End the current call holding or  
waiting (or the multi-conference  
calls if there are any) and accept  
the call (or multi-conference calls).  
(Service depending on the operator  
and depending on model)  
Multi-conferencing  
enables you to talk  
to several callers  
(depending on the  
network capacity  
and on the model).  
A multi-conference is limited to 6  
participants: 5 in a multi-conference  
and one additional call  
1 X  
2
End the current call order number  
X.  
During a call, when pressing the @  
key, the key changes function and gives  
access to different possibilities of actions  
with this call.  
Place on hold the current call (or  
multi-conference calls) and accept  
the call holding or waiting (or multi-  
conference calls).  
7. Call related features  
 
33  
2 X  
Place on hold the  
multi-conference calls  
except for the current  
call order number X  
(private call).  
3
Add a call holding (or  
multi-conference calls)  
to the current call (or  
to the multi-  
conference).  
If you use this  
feature, we  
recommend that you  
first place the  
Tel N°  
Place on hold the  
current caller on  
hold, then dial the  
new number as a  
courtesy to your  
caller and to ensure  
privacy with the  
other party if  
current call (or the  
multi-conference calls)  
and call another  
telephone number.  
End all calls except  
desired.  
for a possible call  
waiting.  
7. Call related features  
 
34  
8.1 Selecting the volume and  
the type of ringing tone  
You can set your phone to ring on  
receiving calls and/or short  
messages.  
There are numerous  
tunes available  
(including a «silent  
ringing tone») and  
several volume  
levels including a  
crescendo.  
You can, during adjustment,  
listen to the melody selected or  
not: activate or don’t by pressing  
@; the symbol appears barred  
or not.  
Select the ringing tone required  
using the scrolling arrows.  
8. How to adjust the ringing  
tones and the vibrator  
Press  
to move on to the next  
section.  
Select the volume required for using the  
phone with the scrolling arrows (from 1 to  
4 and + for the volume crescendo) and  
validate using OK.  
Press  
to move on to the next section.  
Select the volume required for using the  
hands free car or pedestrian kit with the  
scrolling arrows (from 1 to 4 and + for the  
volume crescendo) and validate using OK.  
8. Ringing tDoonwensloaadnfrdomvWibwrwa.Stoomranuals.com. All Manuals Search And Download.  
35  
8.2 Call groups  
8.5 Selecting silent mode  
See chapter How to use the directory for all  
the functions about call groups.  
If you want the ringing tone of your  
phone to be replaced by the vibrator  
and the beeps to be suppressed  
(except for the alarm tone), tick the  
box and validate by pressing OK.  
Silent mode is  
automatically  
deactivated when  
the hands free kit  
car is connected as  
well as when the  
phone is switched  
on/off.  
8.3 Personalising the ringing tone  
You have the option of creating a  
personalised call tune. A help menu,  
This mode is indicated by the  
symbol on the screen saver.  
accessible by pressing  
, will guide you.  
8.6 Setting the beeps  
You can select the  
tones produced by  
your keypad: Beep,  
DTMF (musical  
keys) or non active  
tones (in this last  
case, when you  
press your  
8.4 Setting the vibrator  
Different controls are available:  
Wherever you require your calls to arrive  
discreetly, you can use the vibrator or select  
the silent mode.  
Setting the keypad tones  
Select the tone required using the  
scrolling arrows and validate  
Using the scrolling keys, select one of the  
following options: inactive vibrate, only  
vibrate, vibrate and ring, vibrate then ring.  
(press  
).  
keyboard, it does not  
make a noise).  
Validate by pressing  
.
Setting the network tone  
If you want your phone to give a warning  
beep when it locates a network on which it  
can communicate:  
Tick the box and validate by pressng OK.  
8. Ringing tones and vibrator  
 
36  
Setting the low battery tone  
If you want your phone to give a warning  
beep when your battery is low:  
Tick the box and validate by pressing OK.  
8.7 Deleting DTMF tones  
You can delete the emission of DTMF tones  
during a call. You can thus make a call, in a  
comfortable and discreet way for you caller.  
To be discreet, clear the selecton from the  
box. Validate by pressing OK.  
8. Ringing tDoonwensloaadnfrdomvWibwrwa.Stoomranuals.com. All Manuals Search And Download.  
37  
9.1 Customizing your phone  
Menus type  
You have the option of personalising the  
presentation of the menus, and so of limiting  
access to certain functions.  
Three levels are available:  
-
-
-
Expert: presents all of the functions  
Essential: presents the main functions  
Restricted: limits access to certain  
functions.  
9. How to adjust and  
customize your phone  
Installing the energy saving mode  
In order not to use the phone’s screen light  
and thereby increase its operating time:  
In the Customization/Energy saving  
menu, check No light and press OK to  
validate.  
9. Phone adjustment  
 
38  
Configuring the idle mode  
(depending on model)  
Customizing the programmable  
keys (depending on model)  
This menu, accessible directly by a  
The action allocated  
You can choose between an animated idle  
screen or the economy mode.  
short press on a programmable key  
from the standby screen, enables  
to a programmable  
key is triggered by a  
In the Customization/Screen Saver  
menu, use the scrolling arrows to select  
the animation you want or the economy  
mode.  
you to configure the and  
There are different possibilities for  
each of the keys:  
keys. long press or two  
short presses only  
from the standby  
screen.  
Directory  
Press  
to access the setting of the  
Validate Directory.  
When you press the key, you can see the  
names in the directory.  
animation or economy mode activation  
interval.  
Press OK to validate.  
Rapid dial  
Note: to exit the economy mode, press  
.
Select a name from the directory and  
validate. When you press the key, you will  
automatically call the name selected.  
Personalising the welcome screen  
(depending on model)  
Silent mode  
Silent mode  
Validate Silent mode.  
The ringing tone of your phone  
will be replaced automatically by  
You can personalise the welcome screen of  
your phone by typing a text.  
This mode, indicated  
on the screen saver,  
the vibrator and all the beeps will is automatically  
Validate by pressing OK.  
deactivated/  
be suppressed (except for the  
alarm).  
activated when the  
hands free kit is  
connected.  
9. Phone adjustment  
 
39  
Call voice mail  
9.3 Select the type of response  
Validate Call voice mail.  
When you press the key you will  
automatically call your mailbox number.  
You can reply to a telephone call:  
either automatically, if you have ticked the  
Automatic ans. box (for a hands free kit)  
and validated by pressing OK.  
Text messages  
Validate Text messages.  
When you press the key you can read the  
short messages stored in the SIM card or  
in the phone itself.  
or by pressing any numeric key if you  
have ticked the Any key and validated by  
pressing OK.  
View calls  
Network  
9.4 Selecting the network  
Validate View calls  
When you press the key, you can view the  
list of the last calls made and received if  
available.  
When your home  
network is not  
Every SIM subscription card can  
store an ordered list of preferred  
networks.  
accessible (abroad,  
for example), your  
phone automatically  
searches for another  
available and  
authorised network  
in the order of  
preference indicated  
by the list on the  
SIM card.  
If the list has not been  
9.2 Selecting the display language  
programmed, or if none of the  
networks on the list are available  
or authorised, the phone  
searches for an authorised  
network providing the highest  
level of signal.  
You can select the language in which you  
wish your phone display to operate:  
Automatic selection.  
The display language will be that of your  
SIM card (if available).  
If none of the available network is  
otherwise select the language of your  
choice using the scrolling arrows and  
validate by pressig OK.  
authorized, you can use your phone to  
make emergency calls only until a network  
connection can be re-established.  
9. Phone adjustment  
 
40  
If no network is available, your phone  
continues to search for one.  
9.5 Setting the time and date  
In all cases, the phone searches for its  
home network first.  
Setting time/date/Control menu  
Set the hours and minutes by pressing on  
the corresponding numbers or by scrolling  
through the values using the  
arrows.  
In specific cases, manual forcing is possible.  
Using the scrolling arrows, you can select:  
or  
Press  
to go to the next setting.  
Available networks  
Set the day, month and year.  
Press OK to validate.  
This menu enables you to start a search for  
all available networks at the present location  
and to display them.  
Setting time/date/Display menu  
To manually force the chosen network,  
use the scrolling arrows and validate  
Depending on model:  
(press  
).  
Use the scrolling arrows to select the type  
of clock to be displayed on the screen or  
to display no clock. Press OK to validate.  
Preferred networks  
To program a list of preferred networks into  
your SIM card:  
or  
Check the Display box. Press OK to  
Use the scrolling arrows to select from the  
list.  
validate.  
Validate.  
9.6 Controlling screen contrast  
If the network is not on the list, select the  
country code then the network code (ask the  
organisation from which you obtained the  
SIM card).  
Control screen contrast using the scrolling  
arrows, and validate by pressing OK.  
9. Phone adjustment  
 
41  
9.7 Converting currencies  
This menu enables you to convert one  
currency into another. Using the scrolling  
arrows, you can select:  
Rapid exchange  
If you tick the Rapid exchange box, the  
converter will operate on the standby  
screen, enter the digits required and use  
the scrolling arrows to perform a  
conversion.  
Exchange rate  
Enter the conversion rate corresponding  
to the two selected currencies.  
Currencies  
Enter the symbols of the two currencies to  
convert. A long press on C returns to the  
beginning of the line to enter them (if the  
symbols are already entered).  
9. Phone adjustment  
 
42  
Locked keyboard  
10.1 Locking the keyboard  
You can still make  
emergency calls and  
answer calls.  
This menu enables you to lock your  
phone’s keyboard to prevent calls from  
being made unintentionally in your bag  
or pocket.  
For a quick keypad  
locking, press  
then OK from the  
Tick the Lock box: the keyboard will  
automatically be locked.  
*
To unlock your keyboard:  
standby screen.  
Press then OK.  
*
After unlocking, the keyboard will be locked  
after a certain period.  
Warning  
10.How to use the security  
features of your phone  
10.2 Changing the PIN  
number  
If the wrong PIN  
code is entered three  
times in a row, the  
card will be locked.  
To unlock your card,  
call the organisation  
which issued your  
card for guidance in  
unlocking it.  
You can change your PIN number:  
To the question: Old pin number ?,  
enter your old PIN code and  
validate (press  
).  
If your SIM card is  
permanently locked,  
contact your  
Operator or your  
Service Provider to  
obtain a new card.  
To the question: New pin  
number ?, enter your new PIN  
code (a number between 4 and 8  
digits) and validate by pressing  
OK.  
10.DSowenclouarditfryom Www.Somanuals.com. All Manuals Search And Download.  
43  
To the question: Verify pin number ?, enter  
your new PIN code a second time to verify  
and validate by pressing OK.  
If the incorrect code is entered, the time  
interval between each attempt increases,  
making use impossible.  
To change the phone code, you must first  
check that it is active (Control phone code  
menu).  
Checking the PIN number  
You can activate your PIN number so that it  
is requested and checked every time the  
phone is switched on, so that if the phone is  
lost or stolen, your SIM card cannot be used:  
To activate:  
To the question: Phone code?, enter 0000  
To the question: Pin number ?: enter your  
and validate (press  
).  
PIN number and validate (press  
).  
Tick the Telephone contr box and validate  
Tick the box Pin number cont and validate  
by pressing OK.  
by pressing OK.  
To deactivate:  
To the question: Phone code?, enter your  
code (possibly changed) and validate  
10.3 Changing the PIN2 number (*)  
You have a second PIN number. The  
procedure for modifying the PIN2 number is  
identical to that for the PIN number.  
(press  
).  
Do not tick the Telephone contr box and  
validate by pressing OK because it will  
reset the code to 0000.  
10.4 Changing the phone  
The phone code is a  
code  
secret code,  
intended to protect  
the phone in the  
event of theft. It is  
linked automatically  
to the SIM card  
present on  
The phone code menu enables you  
to activate the phone code so that it  
is requested and checked each time  
the phone is switched on, in the  
case of a different SIM card being  
used.  
activation.  
10. Security  
 
44  
Once the phone code is activated, you can  
modify it:  
10.6 Limiting incoming calls (*)  
To the question: Old phone code?, enter  
your old phone code and validate (press  
).  
Depending on your subscription, this  
service enables you to restrict  
certain types of incoming calls.  
The restriction can  
apply to ALL  
incoming calls or to  
incoming calls when  
you are not in your  
home country (if you  
have roaming).  
To the question: New phone code? enter  
your new phone code (a number of  
between 4 and 8 digits) and validate by  
pressing OK.  
If you have this service, you will  
have been provided with a  
password when you subscribed.  
This password is necessary to  
activate this function.  
Access to this  
To the question: Verify phone code enter  
your new phone code a second time to  
verify it and validate by pressing OK.  
service depends on  
your subscription  
type. For more  
information contact  
your Operator or  
Service Provider.  
You can activate, deactivate, and  
view the status of the type of call  
barring. You can also cancel ALL  
types of barring.  
10.5 Changing the operator  
password (*)  
10.7 Limiting outgoing calls (*)  
You have an operator password. The  
procedure for modifying this password is  
identical to that for your PIN code.  
Depending on your subscription, this  
service stops certain types of  
outgoing calls being made from your  
phone.  
The restriction can  
apply to ALL  
outgoing calls, to all  
your  
If you have this service, you will  
have been provided with a  
password when you subscribed.  
This password is necessary to  
activate this function.  
INTERNATIONAL  
outgoing calls or to  
outgoing  
international calls  
EXCEPT those sent  
to your HOME  
country.  
10.DSowenclouarditfryom Www.Somanuals.com. All Manuals Search And Download.  
45  
You can activate, deactivate, and  
view the status of the type of call  
barring. You can also cancel ALL  
types of barring.  
Warning  
Access to this  
10.9 Charge checking (*)  
service depends on  
your subscription  
type. For more  
information contact  
your Operator or  
Service Provider.  
These functions  
The Settings menu allows you to  
select the type of charge indication  
after entering your PIN2 code:  
depend on the ability  
of the network to  
send charge data to  
your phone in real  
time, and on the  
10.8 Setting up the pre-set  
directory (*)  
-
Currency: enter the currency  
name (maximum 3 characters)  
and charge per unit. Ask your  
operator for this value.  
capacity or options  
on your SIM card.  
The pre-set directory allows you to  
limit calls. When you activate this  
directory, only the numbers you  
store in this directory can be called.  
This directory is  
linked to the SIM  
card. Thus, its size  
is determined by  
limitations of this  
card.  
-
Telephone unit.  
The Limitation menu allows you to activate  
the credit function in the selected currency  
after entering your PIN2 code.  
Before creating it, you must first  
activate it:  
Display the Pre-set directory menu.  
Enter your PIN2 number.  
Tick the Pre-set directory box.  
Validate by pressing OK.  
To create the pre-set directory, proceed as  
you would proceed for another directory (see  
chapter Directory/Storing a number).  
10. Security  
 
46  
11.1 Calculator  
You can operate the calculator using the following  
keys:  
Add  
@
Subtract  
Multiply  
Divide  
*
#
OK  
C
Equals  
Delete  
11.Other functions  
Long press on or # or @ or  
: Decimal point  
*
Monetary operations if  
there is no calculation  
in progress  
Monetary conversion.  
11.2 Setting the alarm  
To use your phone as an alarm clock:  
Using the numbers or the scrolling arrows, set  
the alarm time.  
Press  
to go to the next item.  
Set the minutes.  
Tick the box and validate by pressing OK.  
11. Other functions  
 
47  
The ringer is stopped by pressing  
any key; the alarm remains  
programmed.  
Tick the box and validate by pressing OK.  
Programming the alarm timing  
The alarm function  
is represented on  
the screen by the  
You can be notified that your phone  
is ringing when you are not in your  
car.  
symbol  
.
This can only  
The alarm function remains active  
when the phone is switched off. It is  
not affected by silent mode.  
Permanent flashing  
of this symbol  
happen when the  
vehicle is not  
running.  
indicates that an  
alarm time has been  
programmed but the  
date and time clock  
has not been  
Set the delay after which an  
external warning is set off using the digits  
or scrolling arrows.  
11.3 Setting the timer  
The same procedure is applied as  
for the alarm function, but in this  
case you start a time clock running  
Tick the box and validate by pressing OK.  
initialised.  
11.5 Data parameters  
against a defined value. The phone must  
remain switched on.  
You can set the serial link speed when using  
AT commands.  
11.4 Configure your phone  
To use your phone  
with a hands free kit,  
see the notes  
with a car kit  
supplied with the kit.  
(Depending on the model)  
As regards the phone, there are several  
options:  
Programming the switch-off delay on your  
phone  
Set the phone off delay using the This delay starts  
counting down as  
soon as the end of a  
call is detected.  
numbers or scrolling arrows.  
Press  
to go to the next item.  
11. Other functions  
 
48  
From the standby screen, press on the @  
key to access the local menu for WAP  
functions.  
Depending on model, scrolling menu 0  
allows you to access the WAP function.  
Home: connection to the home page.  
Bookmarks (depending on model): this  
menu enables you to record a directory of  
Internet site names and addresses for easy  
and fast access. From the standby screen,  
following a number key with the @ key  
initiates access to the favourite  
12.WAP Function  
Mobile Internet  
corresponding with the number.  
Go to URL (depending on model): this menu  
enables you to directly enter an Internet  
address.  
Advanced...: access to the sub-menus:  
-
Connection settings which allow you to set  
the parameters for several access  
providers (depending on model). The  
current access service has a star in front  
of it.  
The WAP browser remains the exclusive property of Phone.com. It is therefore  
highly prohibited to modify, translate, reverse engineer, de-compile or  
disassemble the Phone.com browser or any part thereof.  
-
Show URL which presents the current  
Internet address.  
12. WAP Function  
 
49  
-
-
Disconnect which ends the communication  
(allows a navigation whithout being  
connected).  
Disconnection  
You will be  
automatically  
Disconnection is achieved by  
pressing on q then [Menu] and  
then by using the Advanced...  
menu and Disconnect.  
disconnected after a  
short pause if you  
have forgotten to  
disconnect from a  
service.  
Linger timer enables you to set a time  
limit, after which the phone will disconnect  
automatically if you have forgotten to  
disconnect from a service.  
The @ character disappears from  
the sreen.  
Reset cache: empties data stored from  
previous connections.  
Exit from the WAP function  
Quit: return to the phone standby screen.  
To exit from the browser and end  
the current communication (if  
necessary):  
The q icon enables you, by pressing the @  
key, to access two display modification  
possibilities:  
press  
.
-
the zoom to change the size of characters  
by pressing on successively,  
or  
-
full screen display by pressing on  
.
from the local menu, select Quit  
and validate by pressing OK.  
Connection  
From the Home menu, start up connection  
to a service (when connecting on the GSM  
network, the @ character flashes, and the  
cost of communications starts to clock up  
as soon as it stops flashing).  
The WAP browser is licensed from:  
Once connected to a service, press on q  
then [Menu] to return to the local menu.  
12. WAP Function  
 
50  
Depending on the model, several games are  
available. The presentation menu guides you  
on how to best use them.  
13.Games  
13D. oGwanlmoadesfrom Www.Somanuals.com. All Manuals Search And Download.  
51  
Depending on the model,  
different accessories are  
available on your phone:  
Warning  
Additional batteries  
Additional chargers  
Desk charger  
Do not connect/  
disconnect the  
special socket on  
your phone during a  
call.  
The use of the  
EXTERNAL SIGNAL  
function to activate  
the lights on a  
vehicle or the horn,  
in order to take a  
call on a public road,  
may not be  
A cable for data exchange  
between your phone and a  
PC  
Cigarette lighter adapter  
Hands-free kits  
14.Available accessories  
Coloured front panels  
authorised.  
Download from Www.Somanuals.com. All Manuals 1Se4a.rcAhvAandilaDbowlenloaacd.cessories  
52  
Upkeep  
Warning  
Clean your phone using a soft  
slightly damp non fluffy cloth.  
Certain chemical  
products can  
damage plastic. Do  
not use aerosols,  
certain special  
Battery  
cleaning products,  
corrosive products,  
solvents, alcohol  
and detergents.  
After a long period of non use  
(several months), when the charger  
is being connected, the unit might  
not switch on.  
In this case:  
15.Upkeep  
Disconnect the charger, wait a  
few seconds, and plug it in again.  
It may be necessary to repeat  
this several times  
Maintenance menu  
This menu contains information that  
you could be asked for to perform  
specific operations. If they are  
rquired, you will be shown how to  
find information you need.  
15. Upkeep  
 
53  
The use of your phone is controlled  
by safety regulations intended to  
protect both the user and his/her  
environment.  
CE marking on the  
unit conforms to  
directives 1999/5/  
EC, 89/336/CEE  
and 73/23/CEE.  
Electrical safety  
Only use the appropriate chargers  
contained in the manufacturer’s  
catalogue. Using another charger  
could be dangerous and will  
invalidate the manufacturer’s  
warranty.  
16.Recommendations  
The main plug socket must be  
easily accessible.  
The main voltage should  
correspond to that given on the  
manufacturer’s plate on the  
charger.  
16. Recommendations  
 
54  
The phone must be shielded  
sufficiently from electronic  
equipment in the vehicle. It gives off  
micro-waves, which may affect the  
operation of such equipment.  
Warning  
Airplane safety  
Ensure that no part  
of your body is  
permanently close to  
the aerial unless  
there is a metal  
screen (e.g.: a  
In an airplane, your phone must be switched  
off to ensure that it does not interfere with  
the planes systems. Its use is illegal and you  
could be prosecuted or banned from using  
cellular networks in the future if you do not  
abide by these regulations.  
Installation of your phone in a  
vehicle must only be performed  
by qualified personnel.  
vehicle roof, ꢀ).  
Non ionising radiation  
Areas containing combustibles  
To obtain maximum satisfaction from your  
phone, use it in a vertical position. Your  
personal safety can only be improved by  
doing so.  
It is advisable to switch your phone off in the  
vicinity of gas stations.  
Regulations limit the use of radio equipment  
in chemical factories, gas depots and any  
area where there are mines. You are advised  
to abide by these rules.  
Electronic medical equipment  
Your phone emits radio waves that could  
possible interfere with electronic medical  
equipment, for example an auditory  
prosthesis, heart pacemakers, ꢀ Your  
doctor or the manufacturer of the medical  
item will be able to advise you on whether  
your phone could cause such interference.  
Road safety  
Except in an emergency, do not use your  
phone when driving without a hands-free kit  
that enables you to maintain your freedom of  
movement. Always keep your eyes on the  
road when you are driving. To make a call,  
pull to the side of the road, then make your  
call. Abide by the current laws.  
In hospitals, the phone must be switched  
off.  
16. Recommendations  
 
55  
You are strongly advised not to  
connect your phone to the  
charger if it doesn’t contain a  
battery.  
Warning  
General precautions  
The constructor  
cannot be held  
responsible if the  
above  
recommendations  
are not followed or if  
the phone is  
Do not attempt to open your phone and  
repair it yourself. The manufacturer cannot  
be held responsible for any damage/  
accident that may result from this.  
To avoid the risk of  
demagnetisation, do not let  
electronic devices close to your  
phone for a long time.  
Any work carried out by non-authorised  
personnel will invalidate your warranty.  
incorrectly used.  
Do not use your phone in damp areas  
(bathroom, swimming pool, ꢀ). Protect it  
from water and other liquids.  
Do not expose your phone to extreme  
temperatures.  
Do not leave your phone within the reach  
of small children (certain removable parts  
may be accidentally ingested).  
Use your phone with original accessories,  
or your warranty will be rendered invalid.  
The physicochemical processes created  
by chargers impose temperature limits  
when charging the battery. Your phone  
automatically protects the batteries in  
extreme temperatures.  
The software program developed by SAGEM remains the exclusive property of  
SAGEM SA. It is therefore highly prohibited to modify, translate, de-compile or  
disassemble this software program or any part thereof.  
Removing the battery may mean that the  
time is lost.  
16. Recommendations  
 
56  
Answers to your questions  
The telephone does not turn on  
-
Remove the battery and then replace it.  
or  
-
Connect the telephone to the charger  
(check that this is plugged in) for  
approximately 5 minutes.  
No network recognised  
-
Remove the SIM card. Check that there  
is no dust or grit in the SIM slot. Replace  
the SIM card being sure to push it right up  
to the stop point.  
Calls to a messaging service or voice  
server do not get through  
-
Check in the Ringing and beeps/Tones  
menu that the box is ticked.  
Answers to your questions  
 

Q See DVR QSC26404 User Guide
RCA VCR VR602HF User Guide
RGB Spectrum Camcorder SuperView 3000 User Guide
Samsung DVD Player SRD 470D User Guide
Sanyo Clock Radio R227 User Guide
Sanyo Vacuum Cleaner SC B550R User Guide
Sapphire Audio Digital Camera Speed camera User Guide
Scion Stereo System PT546 00121 User Guide
Scotsman Ice Ice Maker Flake and Nugget Ice Machine User Guide
Scotsman Ice Ice Maker FME1504 User Guide